Axis Wakeboard Boat Forum http://www.wakeboatowners.com/ |
|
recommendation on flush kit http://www.wakeboatowners.com/viewtopic.php?f=14&t=129 |
Page 1 of 1 |
Author: | dainbramaged [ Fri Apr 29, 2011 11:03 am ] |
Post subject: | recommendation on flush kit |
have 4 pairs of ear muffs for outboards.....new to inboards. need something for 2011 axis a22. looked online and seen "fake lake" and others....anybody have an opinion of best method regards |
Author: | DBragg [ Fri Apr 29, 2011 11:36 am ] |
Post subject: | Re: recommendation on flush kit |
Fake a lake if you need it |
Author: | admin [ Fri Apr 29, 2011 8:29 pm ] |
Post subject: | Re: recommendation on flush kit |
That is all I have seen used around the shop and I have used them in the past. Has a telescoping pole so it will stay in the right place under the boat. They do not recommend more than a few thousand RPMs when running under the fake a lake so do not run your engine at high RPMs. I think they run in the 40-60 price range depending on where you find them. |
Author: | rpinto [ Tue May 10, 2011 8:39 pm ] |
Post subject: | Re: recommendation on flush kit |
Flush Pros work great. I have one on my boat with a remote hose running to the transome so hooking up the hose is easy. Here is a link to one http://www.westmarine.com/1/1/1826-flus ... -hose.html |
Author: | DustinA22Vandall [ Thu Jun 23, 2011 7:33 am ] |
Post subject: | Re: recommendation on flush kit |
I reccommend a transom flush kit too. My marina installed the one from malibu/axis, works like a charm. hook up a water hose to it, turn it on. keeping engine at idle for 5-10 mins. |
Author: | TankerM8 [ Mon Jun 27, 2011 9:44 am ] |
Post subject: | Re: recommendation on flush kit |
I use the Fake a Lake and have also seen most shops use them for servicing...its easy, quick and an inexpensive way to go! |
Author: | Dave.Mishchenko [ Wed Jun 27, 2012 9:27 pm ] |
Post subject: | Re: recommendation on flush kit |
Is the factory installed flush kit installed between the transmission cooler and the impeller? I was thinking of adding a Perko kit, but a few other threads on other boards suggested that the unit should be installed between the intake and v-drive. |
Author: | nastya20 [ Thu Jun 28, 2012 10:17 am ] |
Post subject: | Re: recommendation on flush kit |
On my last boat I installed the perko about 2 1/2 feet from intake. You can always spring for the hose add on if you're comfy putting a hole in the transom for the flush kit- |
Author: | elc [ Thu Jun 28, 2012 3:30 pm ] |
Post subject: | Re: recommendation on flush kit |
nastya20 wrote: On my last boat I installed the perko about 2 1/2 feet from intake. You can always spring for the hose add on if you're comfy putting a hole in the transom for the flush kit- this is how I have mine set up on my a22. its easy to plug the hose into it. it would also be easy to run a hose back to the transom. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |